Price | : | RM 754.00 |
Discount Price | : | RM 699.00 |
Save | : | RM 55.00 (7.29%) |
: | 699 points | |
INSTALMENT PLAN AVAILABLE
INSTALMENT PLANMaybank EzyPay
Min. Purchase RM500 : 6 months (120.58/ mth) |
||
Brand | : | Linksys |
Delivery within 2-4 working days
|
||
Free shipping only within Malaysia |
Product Description
The Linksys WRT1200AC AC1200 Dual-Band Smart Wi-Fi Wireless Router is a simultaneous dual-band 2 x 2 Gigabit router, which supports 256-QAM modulation, allowing a maximum data rate of 400 Mbps on the 2.4 GHz band and up to 867 Mbps on the 5 GHz band. It has one (1) USB 2.0 / eSATA combo port, and one (1) USB 3.0 port. It has two (2) high-performance external detachable antennas for enhanced dual-band communication, maximum signal strength, better coverage and range.
The Linksys WRT1200AC can create four (4) simultaneous yet separate wireless networks:
For your connected home, you may take advantage of the 2.4 GHz network to connect your wireless devices into to surf the Internet, use email, share files, and print. The 5 GHz network is best for heavy applications including Voice over IP (VoIP) devices, online gaming and high-definition streaming.
Features
Back panel
Adjustable External Antennas - This router is shipped with two (2) adjustable external antennas that should be connected to the router before powering it ON. To connect the antennas, twist the antenna connector clockwise into the antenna port on the router.
Note: The antennas are adjustable to customize your wireless signal for single or multi-story buildings. These are also removable to accommodate upgrades.
Below is the antenna positioning that is recommended for a single-story home:
Note: You can also upgrade your Linksys WRT1200AC’s external antennas for enhanced wireless range and coverage in your single-story home by installing the Linksys WRT High-Gain Antennas, WRT002ANT and WRT004ANT.
Below is the antenna positioning that is recommended for a multi-story home:
Wi-Fi Protected Setup™ button - Press this to easily configure wireless security on WPS-enabled network devices.
Ethernet ports - Use Ethernet cables to connect wired devices into these blue Gigabit (10/100/1000 Mbps) ports.
Note: For best performance, use CAT5E or higher-rated cables on the Ethernet ports.
Internet port - Use an Ethernet cable to connect a broadband Internet Cable / DSL or Fiber optics modem into this yellow Gigabit (10/100/1000 Mbps) port.
Note: For best performance, use CAT5E or higher rated cables on the Ethernet ports.
USB 3.0 - Connect and share a USB drive or printer on your network or on the Internet.
USB I eSATA - Connect and share a USB or eSATA drive on your network or on the Internet. You can also connect a USB printer, but only one (1) device to the port, and share it across your network using the USB Control Center software.
Reset button - Press and hold this button for 10 seconds (until the Power LED starts flashing) to reset the router to factory settings. You can also restore the router to factory default settings using the Linksys Smart Wi-Fi on the Internet or on the mobile app.
Power port - Connect the included AC power adapter into this port.
Power button - Press to switch the router ON or OFF.
Minimum System Requirements
Windows
There are no reviews for this product. Be the first one to share your opinion!
|
|
|
Question |
*Maximum length: 250 characters
|
|
|
No Q&A for this product.